ST – CONDENSATE POTS Condensate Pots The primary use of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapour and condensed phases of the fluid in the impulse lines. The condensate pots are available in a range of materials and sizes and are designed …
ST – CONDITIONING RTJ PADDLE PLATES Conditioning RTJ Paddle Plates Conditioning orifice plates are specially designed 4 hole orifice plates that condition and correct the flow profile at the point of measurement. They require only a 2D upstream and 2D downstream straight length and the use is intended for non-fiscal measurement applications. The design can …
ST – FIGURE 8 SPECTACLE BLINDS Figure-8 Spectacle Blinds Figure-8 spectacle blinds are used to assist with the isolation of sections of pipework from flowing or pressurized mediums, to enable safe maintenance. Figure-8 spectacle blinds are of a dual disc construction with a tab joining the blind and spacer rings. When the spacer disc is …
ST – FLAT FACE PADDLE PLATES Flat Face Paddle Plates Flat Face Paddle Plates are flow metering orifice platesthat fit between orifice flanges by utilizing the PCD ofthe flange, ensuring concentric alignment. The orificeplate has the same hole diameter and outer diameter ofthe flanges. FF Paddle Plates are available in metric andimperial thicknesses. DOWNLOAD DATASHEET …
ST – Grounding rings Grounding Rings Grounding rings are used to suppress electrical interference at the installation location for electromagnetic flow meters (MAG meters). They are provided in pairs and are installed upstream and downstream of the flow meter. Sur-Tech grounding rings are flat paddle plate type wafer style rings designed to be installed between …
ST – MULTI HOLE UNIVERSAL ORIFICE PLATES Multi Hole Universal OrificePlates Multi Hole Universal orifice plates are intended for use in non-fiscal measurement applications. They can be used within orifice meters (see Roto-Boss™ brochure), some types of Orifice Flange Unions, and also in Annular Chambers. They are termed as “universal” as they are manufactured to …
ST – ORiFICE FLANGE UNIONS Orifice Flange Unions Orifice Flange Unions are available in a range of standard line sizes and configurations with optional materials available upon request. OFU’s used for flow measurement applications will have differential tappings added to the flanges. OFU’s used for Restriction or Spectacle Blind applications will not require tapping points. …
ST – PADDLE BLINDS AND SPACERS Paddle Blinds and Spacers Paddle Blinds and Spacers are used to assist with the isolation of sections of pipework from flowing or pressurized mediums, to enable safe maintenance. Paddle type blinds are of a single disc construction with a tab handle or ‘T’-bar handle that can be seen when …
ST – RAISED FACE PADDLE PLATES Raised Face Paddle Plates Raised Face Paddle Plates are used for flow metering or restriction applications, where the orifice plate is installed between ASME B16.36 flanges for flow metering applications or ASME B16.5 flanges for restriction applications. The assembled units are referred to as Orifice Flange Unions. DOWNLOAD DATASHEET …
ST400 tHERMAL mASS ST400: Thermal Mass Flow MeterFor Gases Featuring In-Situ CalibrationCheck Thermal Mass Flow Meters that measure the flow rate and consumption of gases for multiple industrial, municipal and commercial applications. Frequently used for energy management systems to monitor and improve energy efficiency as well as for regulatory compliance in environmental systems including carbon …
