ST – Single Chamber Orifice Meter

Single Chamber Orifice Meters

Single Chamber Orifice Meters are available in a range of standard line sizes and configurations with optional materials available upon request.

Single Chamber Orifice Meters are used for flow measurement applications and are used to aid orifice plate inspections without the need to break the flange pipeline integrity, albeit a line shutdown and depressurisation is required. The plate is housed in a carrier ring with seals to mitigate any process bypass of the plate causing mismeasurement.

Economical and easy-to-use, this low maintenance flow measurement device simplifies the plate inspection and removal process without the need for flange separation.

Features

  • Single Chamber Orifice Meters for flow measurement are quoted complete with orifice plates (datasheet ST-500OP).

    (Full code compliant meter runs/spools and flow conditioners/19 tube bundles will typically be purchased to complete the assembly – refer to relevant datasheet).
  • FACING TYPE: Flat Face ‘FF’, Raised Face ‘RF’, Ring Type Joint, API Groove ‘BX’, Custom ‘C’
  • Materials: High Temp and Low Temp Carbon Steel, Stainless Steel 316, Duplex, Super Duplex, Monel, Inconel
  • SIZES: 2” to 24” – other sizes available upon request
  • ANSI CLASS: 150-2500 ANSI and 10,000 PSI
  • Manufactured in accordance with international measurement codes ISO 5167 & AGA 3
  • Options: Painted or special coatings, please state with inquiry
ORDERING INFORMATIONPart number format for ordering is as follows; SIZE-ANSI-SCH-CODE-CONFIG-FACING-QTY&TAP-MTL
Size2” – 24” (other sizes available upon request)
SCHPipe schedule or custom ID
ANSI150 – 2500 & up to 10,000 PSI
CodeI = ISO 5167
A
= AGA 3
BX
= API Groove
C
= Customer specific
ConfigurationW = Weld x Weld
F = Flange x Flange
FW = Flange x Weld
Flange FacingsRF = Raised Face
RTJ = Ring Joint
BX = API Groove
C = Customer specific
QTY of Tapping pairs2 (one tapping pair per meter side)
4 (two tapping pairs per meter side also known as Telemetry taps)
Note: telemetry taps not available for ISO 5167 orders)
TAPPINGN = NPT-F
F = Flanged (ANSI & facing to suit line flange)
C = Custom
MATERIALWC = High Temp C. Steel
LC = Low Temp C. Steel
316 = Stainless Steel
D = Duplex
SD = Super Duplex
M = Monel
WORKED EXAMPLES
STSC-4-600-80-A-FW-RF-4-N-DSingle Chamber 4” 600# Sch.80 Flange x Weld RF, AGA 3, 4 pairs of NPT-F taps in
Duplex
STSC-8-1500-160-I-FF-RTJ-2-F-LCSingle Chamber 8” 1500# Sch.160 Flange x Flange RTJ, ISO5167, 2 pairs of flanged
taps in Low Temp Carbon Steel

Scroll to Top