Condensate Pots
The primary use of condensate pots is to increase the accuracy of flow measurement in steam pipelines. They provide an interface between the vapour and condensed phases of the fluid in the impulse lines.
The condensate pots are available in a range of materials and sizes and are designed in accordance with ASME VIII Div 1 and produced in ASME coded workshops. All condensate pots are CE* marked to PED 2014/68/EU for use with Group 2 Gases. (Condensate pots with internal volumes under 1 litre are not CE marked as they fall under SEP)
Installation can be either vertical or horizontal lines between the primary (Flow Meter) and the secondary (transmitter / gauge) to act as a barrier to the line fluid permitting direct sensing of the flow conditions. Units should be mounted at the same level minimizing possible error that could arise due to unequal head of fluid in the connecting pressure lines.
Typical industry applications include: Refineries, Power plants, Chemical and Petrochemical, Steel plants and other process industries.
Features
| ORDERING INFORMATION | Part number format is as follows; PRESSURE-VOLUME-CONNECTIONS-MTL |
| Pressure | LP = Low Pressure, HP = High Pressure |
| Volume (Litres) | 0.5, 1.0, 1.5, 2.0, 3.0, 5.0 (custom sizes upon request) |
| Connections | (See datasheet) |
| MTL | CS = Carbon Steel 316 = 316 St. Steel 304 = 304 St. Steel D = Duplex SD = Super Duplex M = Monel |
| WORKED EXAMPLES | |
| STCP-LP-1.0-1-1-1-0- 0-316 | Low Pressure 1.0 L condensate pot with N1 to N4 conns 1/4” NPTF in 316 SS |
| STCP-LP-3.0-2-2-2-2-2-CS | Low Pressure 3.0 L condensate pot with N1 to N6 conns 1/2” NPTF in C. Steel |
declaration under SEP